JOOYFACT A10 Dash Cam Support
Does the dash cam resist heat?
All JOOYFACT dash cams conform to the CE certification standard for safety, and has a working temperature range of -20℃-70℃ (-4°F-158°F). It is safe to operate our dash cam even in extremely hot weather.
Can I use the third party's hardwire kit?
We strongly recommend a JOOYFACT hardwire kit to avoid device incompatibility.
How to choose a good Micro SD card for the JOOYFACT Dash Cam ?
Our dash cam requires a Micro SD card standard U3&Class 10 or above. You can check if the Micro SD card is eligible by its U3 and Class 10 logo.You’d better to order a real brand quality TF card.
Why does the time in Dash Cam reset?
1.You did not connect the B+ wire to Battery + power , check the power cable connection,please.
2.If you use dedicated power cable, the battery on the main board for the settings may be dead .
I wanted to test the parking surveillance function, but it doesn't work when I shake the car.
The working principle of parking surveillance is the same as recording video in emergency situations. It uses a gravity sensor (G-sensor) to sense, wake up the dash cam and record video.
Under normal circumstances, it is difficult for a person to shake the car or slam the door forcibly to simulate a large impact or acceleration similar to an accident. Therefore, it is normal that it doesn’t record an emergency video in a simulation.
How does time-lapse recording work?
Under time-lapse mode, the dash cam records continuously in 1/2/5 frame per second while parking, which plays back at a frame rate of 30FPS. The benefit of this special recording mode is its lower power consumption and longer recording time. It occupies only 1/30,2/30 ,5/30 of storage space compared to ordinary recording, which is stress-free for long-time recording and adaptive to parking.
What should I do if I cannot connect to the dash cam's Wi-Fi?
1. Make sure ACC power is working ,please. If you use dedicated power cable, you need start your engine.
2. Check the LED light first, if the color is RED , take the TF card out and format the TF card by your computer to try first .If you take the TF card out and you can see the WiFi, you need format the TF card or change a quality TF card .
3. Some Andorid phone models, need change the settings of the phones , you can change a phone to try if the LED light is shining BLUE.
4. Check whether you’re connecting to the right device.
5. Please make sure that your Wi-Fi password is filled in correctly.
How to record an emergency video?
Emergency video recording is enabled by default. When the dash cam is turned on, it can record an emergency video automatically when it detects any collisions.
The process of recording an emergency video can’t be interrupted. When the emergency video recording is completed, the dash cam automatically returns to normal video recording mode.
How to enable parking surveillance function?
The parking surveillance function can be enabled only after the parking surveillance cable (fuse box power cable, some dedicated power cable cannot support that ) is installed.
Parking surveillance function is disabled by default. After the parking surveillance cable is installed and the dash cam is connected with your phone, you can enable it in the dash cam’s settings.
Why dash cam got heat?
A10 Specification
Master Chip: Novatek 96670
Image Sensor: SONY IMX335 5.0 Megapixels
Lens: 6G+1 IR or 2G5P+1 IR ,139 degrees of viewing angle
Aperture: F1.8
Video Resolution: 3840*2160@30 FPS ,2560*1440@30 FPS
Audio: Built-in Microphone
Video Format: MP4,HEVC (H.265)
Storage: U3 C10 Real Brand TF Card ( 16G – 256G)
Case Material: ABS+PC
WiFi: REALTEK RTL8189FTV , 802.11b/g/n
GPS: Optional
App Control: LuckyCam,Lercenker,Viidure,
Working Current: 280 mA ( DC 12V )
Static Current : < 10 mA
Working Voltage : DC 12V (Fuse Box )
APP Language: English, Chinese, Russian, French, Spanish, Portuguese, Italian, German, Japanese, Polish, Korean, Romanian, Arabic, Thai, Vietnamese
Working Temperature : -20 to 70 Celsius (-4°F to 158°F)
Working Humidity:15-85% RH
First, right-click the link and select ‘Save link as…’ to download the firmware to your computer, please.